Free Shipping on Everything!
Contact Us: 1-800-958-6670

Cart


BodyBilt J757 Mid Back Task Chair

Upholstery

Cylinder

Casters

Arms

Lumbar Support

Seat Padding

Back Cushion

$1,904.13

Out of stock

SKU: J757 Category:

Description

The J757 mid back task chair with arms provides a slightly curved seat as well as comfortable mid back along with a compatible seat pan that encourages proper ergonomic posture. This ergonomic chair is perfect for the busy executive who desires a balance between ease and usefulness.

Purchase this ergonomic chair if perhaps you would like to increase day-to-day efficiency.

BodyBilt's J757 Mid-Back Task seating was designed specifically for desktop intensive job performers. In addition to BodyBilt's #7 pressure reducing, moderately contoured seat, this model features ten ergonomic adjustments that allows the user to control their own comfort level. The J-style mechanisms pivots from a point near the center of the chair and allows for either a smooth rocking motion or may be locked in a stationary position.

All BodyBilt Mid-Back chairs provide exceptional comfort with upper and low back support. 10-Point Posture Control adjustability puts at your command the tools to address and alleviate stressful aches and pains so often escalated by inferior chairs.

The J750 Series chairs have the following standard features:

  • 700 Series backrest (18 1/2” long x 18 1/2” wide)
  • Backrest angle adjustment
  • Backrest height adjustment (4” height range)
  • Armrest height, articulation and angle adjustment
  • Armrest width adjustment
  • Black non-upholstered arm pads
  • Seat tilt adjustment
  • Seat height adjustment (5.5” height range)
  • Seat tilt tension control
  • Swivel (360º)
  • J-style adjustment mechanism
    • (seat pivots from the center of the mechanism)
  • Black five star base
    • 26” (core diameter) base on chair models
    • 27” (core diameter) base on F1 stool models
  • Carpet casters

Cylinder

Below are the cylinder measurements

Arms

The Optima Arm features five-way movement on the arm support and armpad, which allows the arms to be positioned exactly where the user would like.

The 4-Arm has a curved armpad and 4-way adjustability.

Lumbar Support

Proper lower back support is crucial to a healthy seated posture. Bodybilt chairs are available with standard lumbar support, air lumbar support or S'port foam lumbar support.

Air Lumbar
With the backrest height set to fit the curvature of your lower back (lumbar region) the air lumbar can be inflated to adjust the firmness of the backrest by pumping air into the lumbar area. The air lumbar is a popular feature since users can adjust the amount of lumbar support they prefer quickly and easily. To inflate the backrest, simply press the black rubber bulb with your thumb or fingers until the lumbar area is noticeably firmer. To let the air out, press the black button until deflates to the proper size.

S'port Foam Lumbar
Crafted of comfortable S'port memory foam, the S'port lumbar is non-adjustable but perfect for those that prefer that softer, contoured feel. Adjust your seat back height for proper placement.

Seat Padding

Standard Seat Padding
Standard seat padding is constructed of multiple layers multi-density foam, which provides softness where you want it and firmness for superior support. Less expensive chairs use a single density foam.

S'port Foam Seat Option
S'port Foam is BodyBilt's added layer of memory foam in the seat cushion. As with all foam layers in our seats and back, the added S'port foam is strategically positioned for maximum effect in softness, pressure reduction and anatomical fit.

Back Cushion

Standard Back Cushion
Standard back cushion padding on all BodyBilt chairs consists of durable and comfortable, multi-density foam, unlike less expensive chairs that use single-density foam cushions.

S'port Foam Back
Users who prefer extra softness or who need added reduction of pressure on their back will prefer S'port foam on their chair back. S'port Foam is BodyBilt's added layer of memory foam in the backrest. As with all foam layers in BodyBilt seats and back, the added S'port foam is strategically positioned for maximum effect in softness, pressure reduction and anatomical fit.

S'port Ridge
The S'port Ridge is a vertical foam ridge that offers amazing added support to the middle (thoracic region) and upper back. Your eyes may not see it, but your body will definitely feel it!

The S'port Ridge was conceived and developed by BodyBilt in conjunction with Occupational Therapists in an effort to address this vital area for seated users. The S'port Ridge is a raised, vertical, foam cushion placed along the thoracic ridge and lumbar support areas of the back (essentially a raised ridge that runs down the center of the back behind the spine).

This thoracic support encourages a person to sit with their shoulders rolled back while seated, as this is the way the body was designed. This healthy posture enables the scalene muscles to relax, which relieves the pressure on the brachial plexus nerves. It also alleviates the increased tension in the muscles of the upper back, and improves breathing by raising the chest cavity.

The S'port Ridge delineates the proper curvature of our spinal cord, therefore supporting it in a natural, healthy posture during the seated portion of a workday. This relaxed posture alleviates back aches, neck aches, tiredness and fatigue, and improves circulation and digestion.

Upholstery

Grade 1 Staccato

This is the most durable fabric offered by BodyBilt and perfect for high use situations such as call centers or other 24/7, multi-shift applications. Wear rating is in excess of 1 million double rubs, and Staccato is made of 100% cordura nylon. It meets CA fire retardancy requirements.

bodybilt_staccato

Grade 1 MoonScape

Soft to the touch, heavy duty knit fabric. Moonscape is our stretch knit Grade 1 alternative, rated as heavy duty (exceeding 378,000 d.r.). Moonscape upholsters well onto the contoured curves of BodyBilt chairs, allowing the user to experience the full benefit of S'port foam cushioning.

Grade 1 Hue

Hue is a high performance fabric, rated in excess of one million double rubs. Additionally, it has a very low environmental impact. Hue's content is composed of 100% post-industrial recycled polyester. Hue's recycled fiber content has achieved GreenGuard® certified for Children & Schools indoor air quality.

Grade 2 Dolce Vinyl

Soft and vibrant, Dolce fabrics are made of 100% polyurethane with a 100% rayon backing. Flame retardant (CAL117) and easily cleaned, Dolce is formaldehyde free, scatch resistant, and offers exceptional color fastness.

Grade 3 Comfortek

Comfortek (Grade 3) is a high performance knit fabric which allows the user to fully experience the contours and curves of BodyBilt backs and seats.

Grade 4 Brisa

Brisa is a synthetic leather high performance fabric (exceeding 200,000 double rubs), with a luxurious feel and superior composition. Brisa is a breathable fabric with antimicrobial protection, acoustical properties, is mildew and ink resistant, may be used in ESD environments, and is flame retardant.

Elmosoft Leather

ELMOSOFT leather is a soft and pliable Semi-Aniline leather. Outstanding comfort combined with excellent durability and an extensive shade card, makes it very suitable for the public environment. Visible insect-bites and scars from healed wounds add to the elegant quality of the leather.

If you'd like to order your chair in a color or option that's not shown in the dropdown menu, please contact us to place your order.

Reviews

There are no reviews yet.

Be the first to review “BodyBilt J757 Mid Back Task Chair”